Zhuhai Huacai New Materials Technology Co.,Ltd.
0756-8597566
Zhuhai Huacai New Materials Technology Co.,Ltd.
Your location:
Homepage
/
/
/
Product introduction-How to use G1005U HP cleaning fluid-factory users

Product introduction-How to use G1005U HP cleaning fluid-factory users

(Summary description)1. First, wash the ink cartridge with ultra-pure water until no more colored liquid comes out.

2. First, dilute the cleaning solution CC-G1005U and ultrapure water in a ratio of 1:2 to 1:4. The higher the concentration, the better the cleaning effect.

3. Then heat the mixed solution to 50-60 degrees. (If the cleaning effect is good at room temperature, heating is not necessary)

4. Fill the mixed solution into a clean HP/CANON/LEXMARK ink cartridge and wait for 15-30 minutes, and then use pressure or centrifugation to separate the mixed solution from the ink cartridge to complete the cleaning process.

 

Note: In some cases, the ink cartridges filled with mixed liquid need to be cleaned in an ultrasonic machine. It is better to just immerse the nozzle in the mixed liquid. The specific time depends on different nozzles and ultrasonic machines of different power. This scheme is for reference only, and the specific method varies with different cleaning processes.

Product introduction-How to use G1005U HP cleaning fluid-factory users

(Summary description)1. First, wash the ink cartridge with ultra-pure water until no more colored liquid comes out.

2. First, dilute the cleaning solution CC-G1005U and ultrapure water in a ratio of 1:2 to 1:4. The higher the concentration, the better the cleaning effect.

3. Then heat the mixed solution to 50-60 degrees. (If the cleaning effect is good at room temperature, heating is not necessary)

4. Fill the mixed solution into a clean HP/CANON/LEXMARK ink cartridge and wait for 15-30 minutes, and then use pressure or centrifugation to separate the mixed solution from the ink cartridge to complete the cleaning process.

 

Note: In some cases, the ink cartridges filled with mixed liquid need to be cleaned in an ultrasonic machine. It is better to just immerse the nozzle in the mixed liquid. The specific time depends on different nozzles and ultrasonic machines of different power. This scheme is for reference only, and the specific method varies with different cleaning processes.

Information

1. First, wash the ink cartridge with ultra-pure water until no more colored liquid comes out.

2. First, dilute the cleaning solution CC-G1005U and ultrapure water in a ratio of 1:2 to 1:4. The higher the concentration, the better the cleaning effect.

3. Then heat the mixed solution to 50-60 degrees. (If the cleaning effect is good at room temperature, heating is not necessary)

4. Fill the mixed solution into a clean HP/CANON/LEXMARK ink cartridge and wait for 15-30 minutes, and then use pressure or centrifugation to separate the mixed solution from the ink cartridge to complete the cleaning process.

 

Note: In some cases, the ink cartridges filled with mixed liquid need to be cleaned in an ultrasonic machine. It is better to just immerse the nozzle in the mixed liquid. The specific time depends on different nozzles and ultrasonic machines of different power. This scheme is for reference only, and the specific method varies with different cleaning processes.

Scan the QR code to read on your phone

Feedback

 

留言应用名称:
客户留言
描述:
验证码
Online customer service
Customer service hotline
86+756 8597566 86+756 8597566
Service time:
8:30 - 18:00
Customer service group:
在线客服

Copyright © Zhuhai Huacai New Materials Technology Co.,Ltd.    Copyright   粤ICP备14061442号 

 Copyright © 珠海华彩新材料科技有限公司   版权所有   粤ICP备132341111号  网站建设:中企动力  珠海